What is the role of heating and conditioning in tempering furnaces?

 

The power adjustment is used to adjust the heating speed. Each heating unit can set the power adjustment coefficient separately. For the heating of the tempering furnace, the solid-state relay is used to control the heating speed by using the on-off time. For the tempering furnace heating, the power-modulating module is used, the phase-shifting trigger is controlled by the analog signal, and the output voltage of the module is adjusted to realize the heating power adjustment.

 

What is the single point control function of tempering furnace heating?

 

The heating single point control is standard for convection heating, which is convenient for independent control of temperature at each point. It is also convenient for inspection and testing. With the advanced mode of temperature control, the temperature control in the furnace can be realized to meet the flexible requirements of the process for heating.

Knowledge of heating control in Shike glass tempering furnace

 

What is the same control mode for the glass tempering furnace?

 

When the glass is exported to the tempering furnace, the control mode of the furnace operation is simultaneously performed, and the production mode is higher than that of the normal furnace and then the furnace is produced. The disadvantage is that the speed of the inlet and outlet must be consistent, and the furnace cannot be flexibly set according to the process requirements. .